Preparation and Antibacterial Property of Hydroxyapatite/Titanium compounds

Main Article Content

วัลย์ลิกา สุขสำราญ

Abstract

The hydroxyapatite/titanium compounds (HAP/Ti) were prepared with Ti4+ concentrations of XTi = 0.15, 0.2 and 0.25 [XTi = Ti/(Ca+Ti)]. The HAP/Ti compounds were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and antibacterial property. The antibacterial property was tested by filtering the bacteria suspension solution with the depositing HAP/Ti compounds on a cotton fabric. The results showed that about 95-98% of the bacteria can be removed by the two-layer filter cloth under UV irradiation. It is also found that the cotton fabrics which coated by the HAP/Ti compounds were immersed in the solution containing bacteria under UV irradiation for 60 minutes, the bactericidal killing percentages were about 78-82%.

Keywords

Downloads

Download data is not yet available.

Article Details

Section
Articles

References

1. Anmin, H., Ming, L., Chengkang, C. and Dali, M. (2007). Preparation and Characterization of a Titanium-Substituted Hydroxyapatite Photocatalyst. Journal of Molecular Catalysis A: Chemical. 267: 79–85.

2. Anmin, H., Tong, L., Ming, L., Chengkang, C., Huiqin, L. and Dali, M. (2006). Preparation of nanocrystals hydroxyapatite/TiO2 compound by hydrothermal treatment. Applied Catalysis B: Environmental. 63: 41–44.

3. Beranek, R., & Kisch, H. (2008). Tuning the Optical and Photoelectrochemical Properties of Surface-Modified TiO2. Photochemical & Photobiological Sciences, 7(1), 40-48.

4. Jokanovic, V., Izvonar, D., Dramicanin, M. D., Jokanovic, B., Zivojinovic, V., Markovic, D. and Dacic, B. (2006). Hydrothermal Synthesis and Nanostructure of Carbonated Calcium Hydroxyapatite, Journal of Materials Science: Materials in Medicine. 17: 539-546.

5. Li, Q., Mahendra, S., Lyon, D. Y., Brunet, L., Liga, M. V., Li, D. and Alvarez, P. J. J. (2008). Antimicrobial Nanomaterials for Water Disinfection and Microbial Control: Potential Applications and Implications. Water research. 42: 4591-4602.

6. Manivannan, A., Glaspell, G,. and Dutta, P. (2008). Synthesis of Nanocrystalline TiO2 Particles and Their Structural Characteristics. Journal of Cluster Science. 19, 391–399.

7. Nathanael, A. J., Mangalaraj, D., Chen, P. C. and Ponpandian, N. (2010). Mechanical and Photocatalytic Properties of Hydroxyapatite/Titania Nanocomposites Prepared by Combined High Gravity and Hydrothermal Process. Composites Science and Technology. 70: 419–426.

8. Neumann, M. and Epple M. (2006). Composites of Calcium Phosphate and Polymers as Bone Substitution Materials. European Journal of Trauma. 2: 125-131.

9. Nishikawa, H. (2003). Surface Changes and Radical Formation on Hydroxyapatite by UV Irradiation for Inducing Photocatalystic Activation. Journal of Molecular Catalysis A: Chemical. 206: 331-338.

10. Piantone, P., Bodénan, F., Derie, R., and Depelsenaire, G. (2003). Monitoring the Stabilization of Municipal Solid Waste Incineration Fly Ash by Phosphation: Mineralogical and Balance Approach. Waste Management. 23: 225-243.

11. Tsukada, M., Wakamura, M., Yoshida, N. and Watanabe, T. (2011). Band Gap and Photocatalytic Properties of Ti-Substituted Hydroxyapatite: Comparison with Anatase-TiO2. Journal of Molecular Catalysis A: Chemical. 338: 18-23.

12. Wakamura, M., Hashimoto K. and Watanabe T. (2003). Photocatalysis by Calcium Hydroxyapatite Modified with Ti(IV): Albumin Decomposition and Bactericidal Effect. Langmuir. 19: 3428-3431.

13. Yang, L., Ning, X. Chen, K. and Zhou, H. (2007). Preparation and Properties of Hydroxyapatite Filters for Microbial Filtration. Ceramics International. 33: 483–489.