Manganese- and Iron-Doped Zinc Oxide for Photocatalytic Degradation of Recalcitrant Dyes

Authors

  • Sandhya Babel School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand
  • Hanggara Sudrajat School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand
  • Ajay Aby Abraham School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand

Keywords:

metal doping, sol-gel process, zinc oxide, photocatalyis, dye degradation

Abstract

Mn- and Fe-doped ZnO are synthesized by modified sol-gel method. The as-synthesized catalysts are characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy. Their photocatalytic activity is investigated for the degradation of methylene blue (MB) and amaranth (AM) under UVA and visible light. The results show that the doping of Mn and Fe generally leads to enhanced photocatalytic activity. However, compared to Fe-doped ZnO, pristine ZnO prepared from zinc acetate (acet-ZnO) shows better performances. For instance, using 1 g/L of catalyst under UVA light, the MB degradation with acet-ZnO and Fe-ZnO are 98 and 43% in 90 min at pH 7, respectively. Adsorption of dye insignificantly contributes to the dye removal. Less than 5% of dyes are adsorbed within 2 h in the absence of light. Furthermore, Mn doping is more effective in enhancing the photocatalytic activity. UVA is found to be a better light source for all the catalysts. Using UVA light, 5 mol% Fe-ZnO with concentration of 1 g/L can degrade 93% of AM in 90 min at pH 7. Using visible light under identical experimental conditions, 10 mol% Mn-ZnO gives 50% efficiency for the AM degradation. In all the cases using doped ZnO, the dye degradation increases with increasing catalyst concentration and irradiation time and decreases with increasing dye concentration. Increasing pH generally increases the dye degradation up to an optimum value. Moreover, the MB and AM degradation by Fe-ZnO under visible light mainly occurs through a self-sensitization mechanism instead of oxidation by reactive species. Overall, the developed catalysts are able to efficiently degrade MB and AM in a short period of time. However, they are not that reusable. Therefore, proper techniques are required for regeneration so as to achieve appreciable reusability.

Author Biographies

Sandhya Babel, School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand

School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand

Hanggara Sudrajat, School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand

School of Biochemical Engineering and Technology,
Sirindhorn International Institute of Technology, Thammasat University,
Pathum Thani 12120, Thailand

Ajay Aby Abraham, School of Biochemical Engineering and Technology, Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani 12120, Thailand

School of Biochemical Engineering and Technology,
Sirindhorn International Institute of Technology, Thammasat University,
Pathum Thani 12120, Thailand

Downloads

Published

2016-11-30

How to Cite

Babel, S., Sudrajat, H., & Aby Abraham, A. (2016). Manganese- and Iron-Doped Zinc Oxide for Photocatalytic Degradation of Recalcitrant Dyes. Science & Technology Asia, 21(4), 33–43. Retrieved from https://ph02.tci-thaijo.org/index.php/SciTechAsia/article/view/72005

Issue

Section

Engineering