Study of hydraulic ram pump for using in the mountain people community : A case study of the Ban Ja-Jor, Doi Hang subdistrict, Muang district, Chiangrai province, Thailand

Authors

  • ภักดี สิทธิฤทธิ์กวิน Mechanical engineering, Faculty of engineering, Chiang Rai college, Chiang Rai, Thailand
  • ศิริพงษ์ ตรีรัตน์ Mechanical engineering, Faculty of engineering, Chiang Rai college, Chiang Rai, Thailand

DOI:

https://doi.org/10.14456/rcmrj.2018.127760

Keywords:

optimal thicknesses, reinforced concrete flat slabs, three dimensional plate finite element analyses, Hydraulic ram pump, mountain people community, Hydraulic ram pump, Mountain people community

Abstract

The objective of this study was to find out the Study of hydraulic ram pump for using in the mountain people community : A case study of the Ban Ja-Jor, Doi Hang subdistrict, Muang district, Chiangrai province, Thailand. The study was found on the data of water amount in various sources, height of water source and the height of the agriculture area which was induce to design and construct a hydraulic ram pump. The mountain people community must participate and Installed on the plant of the community. From that, the collect data was of amount and height of the water from the hydraulic ram pump and including the plantation area also. The result found that all hydraulic ram pumps were able to good work. It can feed water at maximum height of 12.5 meters and the maximum flow rate 10 liters/minute and the maximum efficiency 24.1%. The community has arable cultivated area throughout the year on average 50.6 square meters. In addition, the villagers can build their hydraulic ram pumps to use for their own purposes and also knowledge transfer to other interested communities.

References

เทศบาลตำบลดอยฮาง. (2560). ข้อมูลประชากร. แหล่งข้อมูล: http:www.doihang.go.th,index.php/

ธรรมศักดิ์ พันธุ์แสนศรี, ปิยะบุตร โพธิคามบำรุง, ธวัชชัย ชัยธวัชวิถีและวินัย บุญน้อย. (2555). โครงการบริการให้คำปรึกษาและข้อมูลเทคโนโลยีด้านการเกษตร อุตสาหกรรมเกษตร พลังงานและสิ่งแวดล้อมแก่ชุมชน. มหาวิทยาลัยแม่โจ้–แพร่ เฉลิมพระเกียรติ.

บัญญัติ นิยมวาส, บรรเจิด โปฏกรัตน์. (2555). การศึกษาสมรรถนะของเครื่องตะบันน้ำ. วารสารวิศวกรรมศาสตร์ มหาวิทยาลัยสยาม, 13(1), 19-27.

ปริวัสส์ เอื้อนสะอาด, วราวุธ วุฒิวณิชย์ และจิระกานต์ ศิริวิชญ์ไมตรี. (2555). การวิจัยและพัฒนาเครื่องตะบันนํ้าแบบประหยัด. ภาควิชาวิศวกรรมชลประทาน คณะวิศวกรรมศาสตร์ กำแพงแสน มหาวิทยาลัยเกษตรศาสตร์วิทยาเขตกำแพงแสน.

ไพฑูรย์ อินจันทร์, ธีรพงศ์ วงศ์ษาและโยธิน สายใจ. (2557). การทดสอบประสิทธิภาพเครื่องตะบันน้ำ. สาขาวิชาช่างกลเกษตร คณะวิศวกรรมศาสตร์ มหาวิทยาลัยเทคโนโลยีราชมงคลล้านนาลำปาง.

ศูนย์วิจัยพลังงาน มหาวิทยาลัยแม่โจ้. (2555). การผลิตและการใช้งานระบบสูบน้ำ/เชิงกลสำหรับชุมชน. มหาวิทยาลัยแม่โจ้.

Min Than, P. (2008). Construction and Performance Testing of the Hydraulic Ram Pump. GMSARN International Conference on Sustainable Development; 12-14.

Ndache MOHAMMED, S. (2007). Design and Construction of a Hydraulic Ram Pump. Leonardo Electronic Journal of Practives and Technologies, 6(11), 59-70.

Downloads

Published

2018-12-25

How to Cite

สิทธิฤทธิ์กวิน ภ., & ตรีรัตน์ ศ. (2018). Study of hydraulic ram pump for using in the mountain people community : A case study of the Ban Ja-Jor, Doi Hang subdistrict, Muang district, Chiangrai province, Thailand. Rajabhat Chiang Mai Research Journal, 19(2), 25–35. https://doi.org/10.14456/rcmrj.2018.127760

Issue

Section

บทความวิจัย (RESEARCH ARTICLE)