Main Article Content
The objectives of this research are to develop, test, and construction the prototype of easy transport knock down house for sufferer. The load and resistance factor design (LRFD) method was used to design the structure. From the design and testing, the easy transport knock down house for sufferer is the square shape building with gable roof. The building size 4.00 x 4.00 square meters and height 2.40 meters which has 16.00 square meters of usable area and 1.20 meters of gable roof height. This knock down house can separate the usable area into 2 parts include bedroom and toilet. The cost of material is 125,000 Baht per unit or 7,812.5 Baht per square meter. The 6 wheel truck can transport this knock down house. The safety factor (S.F.) of this knock down house equaled to 1.86.
Articles published in Journal of Industrial Technology Ubon Ratchathani Rajabhat University both hard copy and electronically are belonged to the Journal.
 Department of Disaster Prevention and Mitigation. Training Manual: Raise Awareness for Preparing Flood Disaster. Bangkok: Department of Disaster Prevention and Mitigation; 2010. (in Thai)
 Thailand Institute of Scientific and Technological Research (TISTR). Industrial System Construction. Bangkok: Thailand Institute of Scientific and Technological Research; 1977. (in Thai)
 Design and Construction Group. Bill of Quantity for Budget Year 2015/2016. Bangkok: Office of the Basic Education Commission; 2015. (in Thai)
 Thepchatree T. and Lenwari A. Behavior and Design of Steel Structure. Bangkok: Chulalongkorn University Press; 2010. (in Thai)
 Chovichien V. Reinforced Concrete Design (Strength Design Method: SDM). 3rd edition. Bangkok : Chulalongkorn University Press; 2002. (in Thai)
 Engineering Institute of Thailand under H.M.The King's Patronage (EIT). Standard of Steel Building Design: Load and Resistance Factored Design Method. Bangkok: Engineering Institute of Thailand under H.M.The King's Patronage; 2003. (in Thai)
 Jiradumkerng W. Construction Management. Bangkok: Rangsit University Press; 1997. (in Thai)
 American Society for Testing and Materials (ASTM). Annual Book of ASTM Standards. Philadelphia: American Society for Testing and Materials; 2010.
 Piyaphipat S, Pongsiwasatit S and Kampriew S. development prefabricated system for emergency home. Journal of Engineering, RMUTT. 2007; 5(10): 63-74. (in Thai)
 Krichanawarak S. Temporary Housing Design Technique in Rapid Process with Prefabricated Steel Construction [thesis]. Bangkok: Chulalongkorn University; 2004. (in Thai)