การศึกษาสมบัติทางโลหะวิทยาของการเชื่อมอะลูมิเนียมผสมโลหะกึ่งแข็ง 356 ปิด คลุมด้วยกาซอาร์กอน

Authors

  • ธงชัย เครือผือ
  • ปัญญา วงศ์ต่าย
  • ประภาศ เมืองจันทร์บุรี

Keywords:

อะลูมิเนียมโลหะกึ่งแข็ง 356, กาซอาร์กอนปกคลุม, รอยยึดต่อ, Semi-solid state aluminium alloy 356, argon gas cover, bond line

Abstract

การศึกษามุ่งหมายกำหนดหาสมบัติทางโลหะวิทยาของการเชื่อมอะลูมิเนียมผสมโลหะกึ่งแข็ง 356 แบบต่อชน
ด้วยกรรมวิธีการเชื่อมในสภาวะกึ่งแข็งปกคลุมด้วยกาซอาร์กอน, รูพรุนมหภาคปรากฏเป็นส่วนใหญ่เมื่อความเร็ว
หัวหมุด 1,320 รอบต่อนาที เช่นเดียวกับลักษณะจุลภาคคล้ายเส้นใยประสาทเมื่อความเร็วการเชื่อม 120 มิลลิเมตร
(มม.) ต่อนาที, ที่ความเร็วหัวหมุด 1,110 รอบต่อนาที, เกิดก้อนกลมจุลภาคเด่นชัดมากกว่า, โดยเฉพาะความเร็วการ
เชื่อม 160 มม. ต่อนาที นอกจากนี่กาซอาร์กอนยังเพิ่มความร้อนขณะเชื่อม

Study on metallurgical properties of semi-solid metal aluminium alloy 356 welding
covered by argon gas

Thongchai Khrueaphue1*, Panya Wongtai2, Prapas Muangjunburee3
1 Department of Industrial Engineering, Faculty of Engineering, Rajamangala University of Technology Lanna Phitsanulok Campus, Phitsanulok Province 65000
2 Program of Logistics Engineering, Faculty of Engineering, Rambhai Barni Rajabhat University, Chanthaburi Province 22000

The study aims to determine the metallurgical properties of butt joint welding of aluminum alloys SSM 356 with semi-solid state joining process covered by argon gas. Porosities were macroscopically and mostly appeared with pin speed at 1,320 revolutions per minute (rpm), as well as microscopically dendrite characteristic at welding speed of 120 mm per min. The characteristic was microscopically and markedly round shape at 1,110 rpm, especially the welding speed of 160 mm per min. The welding speed of 120 mm per min provided smoother grain dispersing. In addition, argon also increased the heat while welding.



Downloads

How to Cite

1.
เครือผือ ธ, วงศ์ต่าย ป, เมืองจันทร์บุรี ป. การศึกษาสมบัติทางโลหะวิทยาของการเชื่อมอะลูมิเนียมผสมโลหะกึ่งแข็ง 356 ปิด คลุมด้วยกาซอาร์กอน. Health Sci Tech Rev [Internet]. 2015 Dec. 28 [cited 2024 Mar. 29];8(3):170-3. Available from: https://li01.tci-thaijo.org/index.php/journalup/article/view/44426

Issue

Section

Research articles