Main Article Content
The purpose of this study is to study the ability of lignin absorption that was contaminated due to the example of waste water of paper industry that uses bagasse fly ash. From the waste water example, the main characteristic is brown color which was affected by lignin, tannin, humic and fulvic and all of these mixed in the water so it greatly affected the shade of water to be too dark out of standard. After adsorption isotherm testing by equation of Langmuir and Freundlich’s and analyzing the absorption by using Fourier Transform Infrared (FTIR) Spectroscopy, found that the correlation coefficient (R2) of equation of Langmuir and Freundlich is 0.94 and 0.97 subsequently. Considering 1/n value, found that there is more than 1 value and it means that it can absorb extremely on the surface and qm has a negative value. The result of equation of Langmuir testing is not true and the result of analyzing of absorption by using Fourier Transform Infrared (FTIR) Spectroscopy found that the light Intensity of waste water that is absorbed with bagasse fly ash has tendency to decrease. From this test, it can conclude that bagasse fly ash can absorb lignin in waste water and the adsorption behavior has physical tendency to be as the isotherm of Freundlich’s which is the constant absorption.
The article has been published in Kasem Bundit Engineering Journal (KBEJ) is the copyright of the Kasem Bundit University. Do not bring all of the messages or republished except permission from the university.
If the article is published as an article that infringes the copyright or has the wrong content the author of article must be responsible.