Adsorption of copper and lead ions by chitosan powder and sodium tripolyphosphate-modified chitosan resin: Kinetics, mechanism and mass transfer

Main Article Content

kowit Piyamongkala
พิมพ์ชยา วัจนะรัตน์

Abstract

Chitosan powder (CS) and modified chitosan by sodium tripolyphosphate resin (CTP) using as adsorbents to adsorb copper and lead ions in solution were studied in the batch adsorption systems. CS and CTP showed higher selectivity towards lead ion over copper ion in the single metal system. However, it was found the adsorption capacity of copper ion for CS and CTP was 5.17 and 8.10 mg/g, respectively. The adsorption capacity of lead ion onto adsorbents was 7.23 and 8.95 mg/g, respectively. The pseudo-second order was fit to describe the kinetics of adsorption. The mechanism of the adsorption occurred in 3 steps. The rate limiting step for mechanism of adsorption was film diffusion. The external mass - transfer coefficient and intraparticle mass – transfer of CTP were higher than CS. 

Article Details

How to Cite
Piyamongkala, kowit, & วัจนะรัตน์ พ. (2017). Adsorption of copper and lead ions by chitosan powder and sodium tripolyphosphate-modified chitosan resin: Kinetics, mechanism and mass transfer. Naresuan University Engineering Journal, 12(1), 83–96. https://doi.org/10.14456/nuej.2017.4
Section
Research Paper

References

Unsri, B. (2015). Uptake of heavy metals in leaf mustard at Difference growth period and heavy metal concentrations in sandy loam soil. Undergraduate Thesis B. Sc. Natural Resources and Environment, Naresuan University, Phitsanulok.

Piyamongkala, K., Talawat, J., Pothimongkolkul, P. & Kongsompa, C. (2008). Kinetic adsorption of chromium (VI) from electroplating factory onto chitosan resin. Journal of King Mongkut’s University of Technology North Bangkok, 18 (1), 68-79.

Wu, F., Tseng, R. & Juang, R. (2010). A review and experimental verification of using chitosan and its derivatives as adsorbents for selected heavy metals, Journal of Environmental Management, 91, 798-806.

Chantawong, V. (1999). Wastewater treatment from metal plating factory. Journal of King Mongkut’s University of Technology North Bangkok, 9, 4-8.

Chawakitcharoen, P. (2004). Nickel recovery from electroplating wastewater using solvent extraction. Journal of Thai Environmental Engineering, 2, 73-80.

Choo, C.K., Kong, X.Y., Goh, T.L., Ngoh, G.C., Horri, B.A. &

Salamatinia, B. (2016). Chitosan/halloysite beads fabricated by ultrasonic-assisted extrusion-dripping and a case study application for copper ion removal, Carbohydrate Polymers, 138, 16-26.

Majeti, N.V. & Ravi, K. (2000). A review of chitin and chitosan applications. Reactive & Functional Polymers, 46, 1-27.

Samornkraisorakit, P. (2001). Resin technology. presented at Training course Yokohama Training Program, Yokohama, Japan.

Vijayakumar, G., Tamilarasan, R. & Dharmendirakumar, M. (2012).Adsorption, kinetic, equilibrium and thermodynamic studies on the removal of basic dye Rhodamine-B from aqueous solution by the use of natural adsorbent perlite. Journal of Materials and Environmental Science, 3, 157-170.

Alkhamis, K. A., Salem, M. S. & Khanfar, M. S. (2008). The sorption of ketotifen fumarate by chitosan. American Association of Pharmaceutical Scientists (AAPS), 9, 866-869.

Chatsiriwech, D. (2009).Adsorption processes, Chulalongkorn University Press.

Wisetrat, O., Ngamsombat, R., Saueprasearsit, P. & Prasara-A, J. (2012.). Adsorption of suspended oil using bagasse and modified bagasse. Journal of Science and Technology Mahasarakham University, 31, 354-362.

Shannon, R. D. (1976). Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallographica, 31, 751-767.

Srimapol, K. & Tonjoy N. (2003). Cadmium and lead removal from wastewater using coconut shell. Undergraduate Thesis B. Sc. Science, Valaya Alongkorn Rajabhat University under the Royal Patronage, Pathumthani.

Tungkananuruk, N. & Tungkananuruk, K. (2007). Principle of chemical water quality analysis. Kasetsart University Press, Bangkok: Jatujak, 1-281.

Senkao, Y. (2014). Removal of cadmium (II) and lead (II) ions from wastewater by tamarind and pomegranate shell. Journal of Science and Technology Valaya Alongkorn Rajabhat University under the Royal Patronage, 22, 184-201.

Boundless, (2016, May 26) Boston. (1st ed.) [Online] Available URL: https://www.boundless.com/chemistry/ textbooks/bondless-chemistry-textbook/periodicpro perties8/ electronconfiguration68/the-shielding- effectand-effective-nuclear-charge-319-5175

Srisorachatr, S. (2015). Removal of heavy metal ions from wastewater by white charcoal. Srinakharinwirot Engineering Journal, 10, 22-31.

Pearson R.G. (1968). Hard and soft acids and bases, HSAB, part 1: Fundamental principles. Journal of Chemical Education, 45, 581-586.

Vieira, M.G.A., de Almeida Neto, A.F., da Silva, M.G.C., Carneiro C.N. & Melo, Filho A.A. (2014). Adsorption of lead and copper Ions from aqueous effluents on rice husk ash in a dynamic system. Brazilian Journal of Chemical Engineering, 31, 519-529.

Okafor, P.C., Okon, P.U., Daniel, E.F. & Ebenso, E.E. (2012). Adsorption capacity of coconut (cocos nucifera L.) shell for lead, copper, cadmium and arsenic from aqueous solutions. International Journal of Electrochemical Science, 7, 12354-12369.

Onundi, Y.B., Mamun, A.A., Al Khatib, M.F. & Ahmed, Y.M. (2010). Adsorption of copper, nickel and lead ions from synthetic semiconductor industrial wastewater by palm shell activated carbon. International Journal Environmental Science Technology, 7, 751-758.

Karnitz, O., Vinicius Alves Gurgel, L., Cesar Perin de Melo, J., Botaro, V.R., Sacramento Melo, T.M., Pereira de Freitas Gil, R. & Gil, L.F. (2007). Adsorption of heavy metal ion from aqueous single metal solution by chemically modified sugarcane bagasse. Bioresource Technology. 98, 1291-1297.

Ho, Y.S. (2006). Review of second-order models for adsorption systems. Journal of Hazardous Materials, 136, 681-689.

Wu, C.H. (2007). Adsorption of reactive dye onto carbon nanotubes: Equilibrium, kinetics and thermodynamics. Journal of Hazardous Materials, 144, 93-100.

Cheung, C.W., Porter, J.F. & Mckay, G. (2001). Sorption kinetic analysis for the removal of cad mium ions from effluents using bone char. Water Research, 35, 605-612.

Sombatsri, S., Chankaew, C., Kumboonma, P. & Rongchapo, W. (2015). Biosorption of copper(II) using fibroin from cocoon waste. Journal of Science and Technology Ubon Ratchathani University, 1, 50-58.

Ho, Y.S., Ng, J.C.Y. & McKay, G. (2000). Kinetics of pollutant sorption by biosorbents. Separation and Purification Methods, 29, 189-232.

Srivastava, V.C., Swamy, M.M. & Mall, I.D. (2006). Adsorptive removal of phenol by bagasse fly ash and activated carbon: Equilibrium, kinetics and thermodynamics. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 272, 89-104.

Unuabonah, E.I., Adebowale, K.O. & Olu-Owolabi, B.I. (2007).Kinetic and thermodynamic studies of the adsorption of lead (II) ions onto phosphate-modified kaolinite clay. Journal of Hazardous Materials, 144, 386-395.

Önal, Y., Akmil-Başar, C., & Sarıcı-Özdemir, C. (2007). Investigation kinetics mechanisms of adsorption malachite green onto activated carbon. Journal of Hazardous Materials, 146, 194–203.

Mohan, D. & Singh, K.P. (2002). Single-and multi-component adsorption of cadmium and zinc using activated carbon derived from bagasse-an agricultural waste. Water Research, 36, 2304-2318.

El-Kamash, A.M., Zaki, A.A. & Abed El Geleel, M. (2005). Modeling batch kinetics and thermodynamics of zinc and cadmium ions removal from waste solutions using synthetic zeolite A. Journal of Hazardous Materials, 127, 211-220.

Choy, K.K.H., Ko, D.C.K., Cheung, C.W., Porter, J.F. & McKay, G. (2004). Film and intraparticle mass transfer during the adsorption of metal ions onto bone char. Journal of Colloid and Interface Science, 271, 284-295.

Shaverdi, G. (2012). Developing a model for mass transfer in adsorption packed-bed filters. Undergraduate Thesis M. Sc. Applied Science (Mechanical Engineering), Concordia University, Montreal, Quebec, Canada.

Sag, Y. & Aktay, Y. (2000). Mass transfer and equilibrium studies for the sorption of chromium ions onto chitin. Process Biochemistry, 36, 157-173.

Chen, B., Hui, C.W. & McKay, G. (2001). Film-pore diffusion modeling and contact time optimization for the adsorption of dyestuffs on pith. Chemical Engineering Journal, 84, 77-94.