RISK ASSESSMENT OF WORKER EXPOSURE TO METAL FUME PRODUCED IN WELDING PROCESS

Authors

  • ภัครดา แสนสุขสม, จงกล สังข์อ่วม วิศวกรรมศาสตร์

Keywords:

welding fume, heavy metal, risk assessment

Abstract

Welding is the principle process in many industries. Toxic fumes and gaseous are formed during welding process, such as chromium (Cr), lead (Pb), nickel (Ni), cadmium (Cd) and beryllium (Be). The objective of this research evaluated the risk of the workers in 7 people exposed to heavy metals and workers behavior in the workplace. The concentrations of total dust, Cr, Pb, Ni, Cd and Be were measured by Inductively coupled plasma by NIOSH Method 7301. Cr and Ni mean concentrations (respectively 3.125 and 2.75 µg/m3) were below OSHA standard value, but the amount of metal were still higher than observed in general population. This research evaluated the behavior of workers to avoid exposure to metal during work and found that most workers did not practice regularly or did not practice at all. Therefore, workers received a long-term amount of metal that produced by welding fumes, It could also result in long-term health effects. Our results can be used as a guideline for introducing risk management measures for workers in the welding process.

References

สมาคมพิษวิทยาแห่งประเทศไทย

Robert V. Albert, Fume generation in gas metal arc welding, University of New Hampshire, 1996.

Anthony T. Zimmer, Pratim Biswas, Characterization of the aerosols resulting from arc welding processes: Aerosol Science. 32 (2001) 993-1008

Renaud Persoons, Damien Arnoux, Théodora Monssu, Olivier Culié, Gaëlle Roche, Béatrice Duffaud, Denis Chalaye, Anne Maitre, Determinants of occupational exposure to metals by gas metal arc welding and risk management measures: A biomonitoring study, Toxicology Letters. 231 (2014) 135-141.

K. Yu. Kirichenko, V. A. Drozd, V. V. Chaika, A. V Gridasov, A. S. Kholodov, K. S. Golokhvast, Nano- and microparticles in welding aerosol: granulometric analysis, Physics Procedia 86 ( 2017) 50 – 53.

Olivera Popović, Radica Prokić-Cvetković, Meri Burzić, Uroš Lukić, Biljana Beljić, Fume and gas emission during arc welding :Hazards and recommendation, Renewable and Sustainable Energy Reviews 37 (2014) 509-516.

Antonini, J.M., Health effects of welding, Crit. Rev. Toxicol. 33 (2003) 61–103.

James M. Antonini, Sam Stone, Jenny R. Roberts, Bean Chen, Diane Schwegler-Berry, Aliakbar A. Afshari, David G. Frazer, Effect of short-term stainless steel welding fume inhalation exposure on lung inflammation, injury, and defense responses in rats, Toxicology and Applied Pharmacology 223 (2007) 234–245.

T. Wittczak, J. Walusiak, C. Palczynski, Welding-related respiratory diseases,Med. Pr. 60 (2009) 201–208.

Downloads

Published

2019-06-23

Issue

Section

Research Articles