Recycled of Asphalt Road using Microwave Heating

Main Article Content

Thaweesak Runngsakthaweekul
Ratthasak Prommas
Nichapha Minabhun

Abstract

This research studied the asphalt recycling process of microwave pre-heating which mainly targeted the
physical and mechanical properties of asphalt after microwave pre-heating process, effect of microwave power causes a change in temperature of asphalt and suitable time of microwave pre-heating for turning hard asphalt into soft asphalt. The experiment was studied at the power of magnetron of 400, 500, 600, 700 and 800 Watts and heating time of 5, 10, 20 and 25 minutes. The research results regarding the physical and mechanical properties of asphalt heated by microwave including watt and suitable time for soft asphalt in recycling found that at power 600 Watts, 10 minutes time, the asphalt had a uniform temperature especially at 146.00 ± 0.70 C and which was most appropriate for recycling. The economic analysis showed that electric energy at 0.099 kWh was deemed as saving energy when compared with the other time and Wattage which did not change asphalt’s physical and mechanical properties between 120 C - 160 C. Accordingly, the research result can be applied for the design and creation of an effective drying device for asphalt road surface, as well as reducing energy consumption.

Article Details

Section
Research Articles

References

Saipong, A. (2007). Performance of Highway Embankments on Bangkok Clay. The 2nd Seminar on Highway Engineering. Bangkok. pp. 409-427.

Tabensky, W. (1990). Road Recycling in US, Shirr of Bulk Memo. No. 83. pp.66-73.

Rammanujam, J.M. (1995). Performance Monitoring of Thin Lift (Cement/Bitumen) and Deep Lift (Cement/Fly ash, Cement/Slag) Pavement Recycling Project. Pavement Rehabilitation Workshop. 24 & 25 August 1995. Queensland. pp. 1-20.

Reeves, IN. (1995). Innovation Impacting Pavement Recycling Options. Pavement Rehabilitation Workshop.24 & 25 August1995.Queensaland. pp. 1-11.

Black, D.J. (1995). Towards a Specification for Deep Lift in Situ Pavement Stabilization, Road & Traffic Authority, Vol. 10, NO. 5, pp. 1-4.

Walton, J.E. (1995). Cold In Place Recycling Results and Procedures Most Often Ask Questions and Answer. Pavement Rehabilitation Workshop.24 & 25 August 1995. Queensland. pp. 1-15.

Narong, K. (2000). Asphalt Technology. Rangsit University, Pathumthani.

Ratthasak, P. (2008). “Energy and exergy analysis in drying process of porous media using hot air” The 22nd Conference on Mechanical Engineering Network of Thailand (ME-NETT 22)

S. Vongpradubchai, P. Rattanadecho, (2009). The Microwave Processing of Wood using a Continuous Microwave Belt Drier, Chem. Eng. Process. 33, pp. 472-481.

Ratanadecho, P., Aoki, K. and Akahori, M. (2002). “The Characteristics of Microwave Melting of Frozen Packed Bed Using a Rectangular Waveguide.” IEEE Transaction of Microwave Theory and Techniques, Vol. 50(6), pp. 1495-1502